Three Phase Conveyor Belt Hot Splicing Machine Hydraulic Pressure Plate Energy Saving ADRS/DMYB HE1W14156-12 manufacturer from China Wuxi ComiX Vulcanization Technology Co.,Ltd.

Place of Origin:

Zhejiang, China (Mainland)

Product Detail

Model No.: ADRS/DMYB HE1W14156-12

Three Phase Conveyor Belt Hot Splicing Machine Hydraulic Pressure Plate Energy Saving

&nb

Three Phase Conveyor Belt Hot Splicing Machine Hydraulic Pressure Plate Energy Saving

Production Features

1. The main parts of this vulcanizer is made of aluminum alloy, which results in smaller volume, lighter

weight, and easier carrying.

2. The electrothermal components are of multilayer structure, connected by three-phase electric circuit at

3. Voltage 380V (or 660V). It works stably and reliably on small current.

4. The heating plate shell is made of aluminum alloy, with low thermal inertia and directivity, can make

better surface heating temperature uniformity.

5. During the working time of the heating plate, from warming to vulcanizing, the time and temperature are

both controlled by the control box. It ensures low energy consumption, high efficiency, convenient

operation, reliable work, and good vulcanization quality.

6. The type of the pressure device is hydraulic pressure plate, its structure is simple and the maintenance

is convenient. It can make large and even pressure during vulcanization.

Technical Parameters

Model	ADRS/DMYB HE1W14156-12
Belt Width	1200mm/42-47 inches
Voltage	220V 380V 415V 660V 50HZ(Other voltages are also available)
Fast cooling time	15 minutes (from 145 degrees down to 70 degrees or less)
Temperature raise (from normal temperature to 145)	no more than 25 minutes
The temperature difference of heating plate working surface	±2°c
Temperature adjustment range	0~200°c
Vulcanizing pressure	1.0~1.4 MPa
Time of heat preservation	Usually 30mins
Degree of heating plate	20°(rectangle other bias angle is also available)
Suitable for belt type	Common rubber conveyor belt and steel cord conveyor belt